Kann sshd config Match User nicht zum Laufen bringen

Erforsche ssh auf meinem El Capitan-Laptop und habe es geschafft, die schlüsselbasierte Anmeldung zum Laufen zu bringen (mit einem Konto namens adminuser). Ich möchte jetzt sehen, ob ich ein anderes Administratorkonto (pwtest) mit passwortbasierter Anmeldung zum Laufen bringen kann.

Ich habe gerade Match User entdeckt und sshd_config hinzugefügt, aber als ich ssh [email protected] und geben Sie dann das Passwort Ich bekomme nur " Erlaubnis verweigert, bitte versuchen wieder."

Sshd_config:

#   $OpenBSD: sshd_config,v 1.95 2015/04/27 21:42:48 djm Exp $

# This is the sshd server system-wide configuration file.  See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options override the
# default value.

# See sshd_config(5) for details on setting the Port and Listen values on Mac OS X
#Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::

# The default requires explicit activation of protocol 1
#Protocol 2

# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
#HostKey /etc/ssh/ssh_host_ed25519_key

# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 1024

# Ciphers and keying
#RekeyLimit default none

# Logging
# obsoletes QuietMode and FascistLogging
SyslogFacility AUTHPRIV
#LogLevel INFO

# Authentication:

#LoginGraceTime 2m
#PermitRootLogin no
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10

#RSAAuthentication yes
#PubkeyAuthentication yes

# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile  .ssh/authorized_keys

#AuthorizedPrincipalsFile none

#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody

# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes

# To disable tunneled clear text passwords both PasswordAuthentication and
# ChallengeResponseAuthentication must be set to "no".
PasswordAuthentication no
#PermitEmptyPasswords no

# Change to no to disable s/key passwords
ChallengeResponseAuthentication no

# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no

# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
#GSSAPIStrictAcceptorCheck yes
#GSSAPIKeyExchange no

# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication.  Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
# Also, PAM will deny null passwords by default.  If you need to allow
# null passwords, add the " nullok" option to the end of the
# securityserver.so line in /etc/pam.d/sshd.
UsePAM no

#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
#XauthLocation xauth # Default is to search $PATH (set by launchd(8)).  It is recommended that a full path be provided.
#X11DisplayOffset 10
#X11UseLocalhost yes
#PermitTTY yes
#PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
UsePrivilegeSeparation sandbox      # Default for new installations.
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS no
#PidFile /var/run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none

# pass locale information
AcceptEnv LANG LC_*

# no default banner path
#Banner none

# override default of no subsystems
Subsystem   sftp    /usr/libexec/sftp-server

# Example of overriding settings on a per-user basis
#Match User anoncvs
#   X11Forwarding no
#   AllowTcpForwarding no
#   PermitTTY no
#   ForceCommand cvs server

Match User pwtest
    PasswordAuthentication yes

Ssh -vv [email protected] Ausgang:

Unknown-58-b0-35-63-5c-67:~ davidpark$ ssh -vv [email protected]
OpenSSH_6.9p1, LibreSSL 2.1.7
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: /etc/ssh/ssh_config line 20: Applying options for *
debug2: ssh_connect: needpriv 0
debug1: Connecting to dplaptop.local [fe80::5ab0:35ff:fe63:5c67%en1] port 22.
debug1: Connection established.
debug1: key_load_public: No such file or directory
debug1: identity file /Users/davidpark/.ssh/id_rsa type -1
debug1: key_load_public: No such file or directory
debug1: identity file /Users/davidpark/.ssh/id_rsa-cert type -1
debug1: key_load_public: No such file or directory
debug1: identity file /Users/davidpark/.ssh/id_dsa type -1
debug1: key_load_public: No such file or directory
debug1: identity file /Users/davidpark/.ssh/id_dsa-cert type -1
debug1: key_load_public: No such file or directory
debug1: identity file /Users/davidpark/.ssh/id_ecdsa type -1
debug1: key_load_public: No such file or directory
debug1: identity file /Users/davidpark/.ssh/id_ecdsa-cert type -1
debug1: key_load_public: No such file or directory
debug1: identity file /Users/davidpark/.ssh/id_ed25519 type -1
debug1: key_load_public: No such file or directory
debug1: identity file /Users/davidpark/.ssh/id_ed25519-cert type -1
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.9
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.9
debug1: match: OpenSSH_6.9 pat OpenSSH* compat 0x04000000
debug2: fd 5 setting O_NONBLOCK
debug1: Authenticating to dplaptop.local:22 as 'pwtest'
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: [email protected],ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,[email protected],[email protected],[email protected],[email protected],[email protected],ssh-ed25519,ssh-rsa,ssh-dss
debug2: kex_parse_kexinit: [email protected],aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected],arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: [email protected],aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected],arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-sha1,[email protected],[email protected],[email protected],[email protected],hmac-md5,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-sha1,[email protected],[email protected],[email protected],[email protected],hmac-md5,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit: none,[email protected],zlib
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: [email protected],ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group14-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256,ssh-ed25519
debug2: kex_parse_kexinit: [email protected],aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected]
debug2: kex_parse_kexinit: [email protected],aes128-ctr,aes192-ctr,aes256-ctr,[email protected],[email protected]
debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],[email protected],[email protected],[email protected],hmac-sha2-256,hmac-sha2-512,hmac-sha1
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug1: kex: server->client [email protected] <implicit> none
debug1: kex: client->server [email protected] <implicit> none
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug1: Server host key: ecdsa-sha2-nistp256 SHA256:pZ9I3OlB5kUmeKHq4PWADSigAPIAmO7VWK10Pn5Vau4
debug1: Host 'dplaptop.local' is known and matches the ECDSA host key.
debug1: Found key in /Users/davidpark/.ssh/known_hosts:1
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /Users/davidpark/.ssh/id_rsa (0x0),
debug2: key: /Users/davidpark/.ssh/id_dsa (0x0),
debug2: key: /Users/davidpark/.ssh/id_ecdsa (0x0),
debug2: key: /Users/davidpark/.ssh/id_ed25519 (0x0),
debug1: Authentications that can continue: publickey,password
debug1: Next authentication method: publickey
debug1: Trying private key: /Users/davidpark/.ssh/id_rsa
debug2: we sent a publickey packet, wait for reply
debug1: Authentications that can continue: publickey,password
debug1: Trying private key: /Users/davidpark/.ssh/id_dsa
debug1: Trying private key: /Users/davidpark/.ssh/id_ecdsa
debug1: Trying private key: /Users/davidpark/.ssh/id_ed25519
debug2: we did not send a packet, disable method
debug1: Next authentication method: password
[email protected]'s password:
debug2: we sent a password packet, wait for reply
debug1: Authentications that can continue: publickey,password
Permission denied, please try again.
[email protected]'s password:
debug2: we sent a password packet, wait for reply
debug1: Authentications that can continue: publickey,password
Permission denied, please try again.
[email protected]'s password:
debug2: we sent a password packet, wait for reply
debug1: Authentications that can continue: publickey,password
debug2: we did not send a packet, disable method
debug1: No more authentication methods to try.
Permission denied (publickey,password).

Passwort:

#   $OpenBSD: ssh_config,v 1.28 2013/09/16 11:35:43 sthen Exp $

# This is the ssh client system-wide configuration file.  See
# ssh_config(5) for more information.  This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.

# Configuration data is parsed as follows:
#  1. command line options
#  2. user-specific file
#  3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.
# Site-wide defaults for some commonly used options.  For a comprehensive
# list of available options, their meanings and defaults, please see the
# ssh_config(5) man page.

# Apple:
 Host *
   SendEnv LANG LC_*
#   AskPassGUI yes


#   ForwardAgent no
#   ForwardX11 no
#   RhostsRSAAuthentication no
#   RSAAuthentication yes
#   PasswordAuthentication no
#   HostbasedAuthentication yes
#   GSSAPIAuthentication no
#   GSSAPIDelegateCredentials no
#   BatchMode no
#   CheckHostIP yes
#   AddressFamily any
#   ConnectTimeout 0
#   StrictHostKeyChecking ask
#   IdentityFile ~/.ssh/identity
#   IdentityFile ~/.ssh/id_rsa
#   IdentityFile ~/.ssh/id_dsa
#   Port 22
#   Protocol 2,1
#   Cipher 3des
#   Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
#   MACs hmac-md5,hmac-sha1,[email protected],hmac-ripemd160
#   EscapeChar ~
#   Tunnel no
#   TunnelDevice any:any
#   PermitLocalCommand no
#   VisualHostKey no
#   ProxyCommand ssh -q -W %h:%p gateway.example.com
#   RekeyLimit 1G 1h

System.log Inhalt:

Nov  9 15:07:28 Unknown-58-b0-35-63-5c-67 sshd[1868]: Failed password for pwtest from fe80::5ab0:35ff:fe63:5c67%en1 port 49985 ssh2
Nov  9 15:07:51 --- last message repeated 2 times ---
Nov  9 15:07:51 Unknown-58-b0-35-63-5c-67 sshd[1868]: Connection closed by fe80::5ab0:35ff:fe63:5c67%en1 [preauth]
Nov  9 15:07:51 Unknown-58-b0-35-63-5c-67 com.apple.xpc.launchd[1] (com.openssh.sshd.CC0FA77D-7484-4138-96BA-7BC748771FA1[1868]): Service exited with abnormal code: 255

Folgende @Otheus Vorschläge:

Wenn ich eine einfache Vanille-sshd_config-Datei verwende, dh sudo /usr/sbin/sshd -D -d -f /etc/ssh/sshd_config.plain -p 2020, kann ich erfolgreich ssh -p 2020 [email protected] - siehe Debug-Ausgabe unten:

...
debug1: expecting SSH2_MSG_KEX_ECDH_INIT [preauth]
debug1: SSH2_MSG_NEWKEYS sent [preauth]
debug1: expecting SSH2_MSG_NEWKEYS [preauth]
debug1: SSH2_MSG_NEWKEYS received [preauth]
debug1: KEX done [preauth]
debug1: userauth-request for user pwtest service ssh-connection method none [preauth]
debug1: attempt 0 failures 0 [preauth]
debug1: PAM: initializing for "pwtest"
debug1: PAM: setting PAM_RHOST to "fe80::5ab0:35ff:fe63:5c67%en1"
debug1: userauth-request for user pwtest service ssh-connection method publickey [preauth]
debug1: attempt 1 failures 0 [preauth]
debug1: temporarily_use_uid: 503/20 (e=0/0)
debug1: trying public key file /Users/pwtest/.ssh/authorized_keys
debug1: Could not open authorized keys '/Users/pwtest/.ssh/authorized_keys': No such file or directory
debug1: restore_uid: 0/0
Failed publickey for pwtest from fe80::5ab0:35ff:fe63:5c67%en1 port 49288 ssh2: RSA SHA256:Y4oh+ZwNsE9hrnD+kCGYUkl48TypV0oQxXi9osTozE4
debug1: audit_event: unhandled event 6
debug1: userauth-request for user pwtest service ssh-connection method keyboard-interactive [preauth]
debug1: attempt 2 failures 1 [preauth]
debug1: keyboard-interactive devs  [preauth]
debug1: auth2_challenge: user=pwtest devs= [preauth]
debug1: kbdint_alloc: devices 'pam' [preauth]
debug1: auth2_challenge_start: trying authentication method 'pam' [preauth]
Postponed keyboard-interactive for pwtest from fe80::5ab0:35ff:fe63:5c67%en1 port 49288 ssh2: RSA SHA256:Y4oh+ZwNsE9hrnD+kCGYUkl48TypV0oQxXi9osTozE4 [preauth]
debug1: do_pam_account: called
debug1: PAM: num PAM env strings 2
Postponed keyboard-interactive/pam for pwtest from fe80::5ab0:35ff:fe63:5c67%en1 port 49288 ssh2 [preauth]
debug1: do_pam_account: called
Accepted keyboard-interactive/pam for pwtest from fe80::5ab0:35ff:fe63:5c67%en1 port 49288 ssh2
debug1: monitor_child_preauth: pwtest has been authenticated by privileged process
debug1: monitor_read_log: child log fd closed
debug1: PAM: establishing credentials
User child is on pid 473
debug1: PAM: establishing credentials
debug1: permanently_set_uid: 503/20
debug1: ssh_packet_set_postauth: called
debug1: Entering interactive session for SSH2.
debug1: server_init_dispatch_20
debug1: server_input_channel_open: ctype session rchan 0 win 1048576 max 16384
debug1: input_session_request
debug1: channel 0: new [server-session]
debug1: session_new: session 0
debug1: session_open: channel 0
debug1: session_open: session 0: link with channel 0
debug1: server_input_channel_open: confirm session
debug1: server_input_global_request: rtype [email protected] want_reply 0
debug1: server_input_channel_req: channel 0 request pty-req reply 1
debug1: session_by_channel: session 0 channel 0
debug1: session_input_channel_req: session 0 req pty-req
debug1: Allocating pty.
debug1: session_new: session 0
debug1: session_pty_req: session 0 alloc /dev/ttys002
debug1: server_input_channel_req: channel 0 request env reply 0
debug1: session_by_channel: session 0 channel 0
debug1: session_input_channel_req: session 0 req env
debug1: server_input_channel_req: channel 0 request shell reply 1
debug1: session_by_channel: session 0 channel 0
debug1: session_input_channel_req: session 0 req shell
Starting session: shell on ttys002 for pwtest from fe80::5ab0:35ff:fe63:5c67%en1 port 49288
debug1: Setting controlling tty using TIOCSCTTY.

Aber wenn ich meine modifizierte ssh_config sudo /usr/sbin/sshd -D -d -f /etc/ssh/sshd_config -p 2020, ssh -p 2020 [email protected] funktioniert nicht-Debug-Ausgabe unten:

...
debug1: Client protocol version 2.0; client software version OpenSSH_6.9
debug1: match: OpenSSH_6.9 pat OpenSSH* compat 0x04000000
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.9
debug1: permanently_set_uid: 75/75 [preauth]
debug1: list_hostkey_types: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256,ssh-ed25519 [preauth]
debug1: SSH2_MSG_KEXINIT sent [preauth]
debug1: SSH2_MSG_KEXINIT received [preauth]
debug1: kex: client->server [email protected] <implicit> none [preauth]
debug1: kex: server->client [email protected] <implicit> none [preauth]
debug1: expecting SSH2_MSG_KEX_ECDH_INIT [preauth]
debug1: SSH2_MSG_NEWKEYS sent [preauth]
debug1: expecting SSH2_MSG_NEWKEYS [preauth]
debug1: SSH2_MSG_NEWKEYS received [preauth]
debug1: KEX done [preauth]
debug1: userauth-request for user pwtest service ssh-connection method none [preauth]
debug1: attempt 0 failures 0 [preauth]
debug1: user pwtest matched 'User pwtest' at line 146
debug1: userauth-request for user pwtest service ssh-connection method publickey [preauth]
debug1: attempt 1 failures 0 [preauth]
debug1: temporarily_use_uid: 503/20 (e=0/0)
debug1: trying public key file /Users/pwtest/.ssh/authorized_keys
debug1: Could not open authorized keys '/Users/pwtest/.ssh/authorized_keys': No such file or directory
debug1: restore_uid: 0/0
Failed publickey for pwtest from fe80::5ab0:35ff:fe63:5c67%en1 port 49290 ssh2: RSA SHA256:Y4oh+ZwNsE9hrnD+kCGYUkl48TypV0oQxXi9osTozE4
debug1: audit_event: unhandled event 6
debug1: userauth-request for user pwtest service ssh-connection method password [preauth]
debug1: attempt 2 failures 1 [preauth]
Failed password for pwtest from fe80::5ab0:35ff:fe63:5c67%en1 port 49290 ssh2
debug1: userauth-request for user pwtest service ssh-connection method password [preauth]
debug1: attempt 3 failures 2 [preauth]
Failed password for pwtest from fe80::5ab0:35ff:fe63:5c67%en1 port 49290 ssh2
debug1: userauth-request for user pwtest service ssh-connection method password [preauth]
debug1: attempt 4 failures 3 [preauth]
Failed password for pwtest from fe80::5ab0:35ff:fe63:5c67%en1 port 49290 ssh2
Connection closed by fe80::5ab0:35ff:fe63:5c67%en1 [preauth]
debug1: do_cleanup [preauth]
debug1: monitor_read_log: child log fd closed
debug1: do_cleanup
debug1: Killing privsep child 497
debug1: audit_event: unhandled event 12